Roland V-8HD HDMI Video Switcher - Manual (Page 64)

64
Menu List
Menu item Value
(Bold: default) Explanation
CTL A ASSIGN
CTL B ASSIGN
INPUT SCAN NORMAL
Consecutively switches the input video in the order of INPUT 1 0 8 each time
you press.
INPUT SCAN REVERSE
Consecutively switches the input video in the order of INPUT 8 0 1 each time
you press.
MEMORY SCAN NORMAL
Consecutively switches the preset memory in the order of 1 0 8 each time you
press.
MEMORY SCAN REVERSE
Consecutively switches the preset memory in the order of 8 0 1 each time you
press.
EXP ASSIGN
Specifies the function that is assigned to the expression pedal.
* This is valid when “CTL/EXP TYPE” is set to “EXP.”
N/A
No function is assigned.
VIDEO FADER Slides the video fader to the top edge or bottom edge.
H CUT I Switches the video between A/PGM bus and B/PST bus as a cut.
VFX A MIX LEVEL
Adjusts the density (output level) of the video that is processed by the visual
effect A.
VFX B MIX LEVEL
Adjusts the density (output level) of the video that is processed by the visual
effect B.
OUTPUT FADE LEFT Turns the [OUTPUT FADE] knob counterclockwise.
OUTPUT FADE RIGHT Turns the [OUTPUT FADE] knob clockwise.
STILL 1–8 OUTPUT Switches the output video to the specified still image.
INPUT 1–8 AUDIO LEVEL Adjusts the volume of the specified input channel.
AUDIO IN AUDIO LEVEL Adjusts the volume of AUDIO IN.
AUDIO OUTPUT LEVEL Adjusts the volume of AUDIO OUT.
AUX OUTPUT LEVEL Adjusts the volume of AUX bus.
EXP CALIBRATE ENTER
* This is valid when “CTL/EXP TYPE” is set to “EXP.”
Displays the EXP CALIBRATE screen.
Following the direction on the screen, calibrate (adjust) the expression pedal.
The first time you use the expression pedal, be sure to execute calibration so
that the pedal will operate optimally.
In some cases, the expression pedal might no longer be operating optimally
because of the passage of time or the conditions of use. In such cases you
should also execute expression pedal calibration.
16: USB MEMORY
Menu item Value
(Bold: default)
Explanation
RESTORE ALL SETTINGS ENTER
This loads settings that are in a preset memory saved on a USB flash drive.
When you press the [VALUE] knob, a list of the files in the USB flash drive
appears.
When you select the file that you want to recall and press the [VALUE] knob,
the contents of this unit are overwritten.
BACKUP ALL SETTINGS ENTER
Saves the current settings as a file on the USB flash drive.
When you press the [VALUE] knob, a list of the files in the USB flash drive
appears.
If you are saving as a new file, select “NEW FILE...” and enter a file name.
If you are overwriting an existing file, select that file in the list.
When you press the [VALUE] knob, the file is saved to the USB flash drive.
FORMAT EXEC
Formats the USB flash drive.
When you press the [VALUE] knob, format is executed.