Roland V-8HD HDMI Video Switcher - Manual (Page 40)

40
Other Features
1 . Connect a footswitch as described in p. 5.
2 . Press the [MENU] button 0 “CTL/EXP” 0 select
“CTL/EXP 1” or “CTL/EXP 2,” and press the [VALUE]
knob.
3 . Turn the [VALUE] knob to select “CTL TYPE,” and
press the [VALUE] knob.
4 . Turn the [VALUE] knob to select “CTL A & CTL B,”
and press the [VALUE] knob.
5 . Turn the [VALUE] knob to select “CTL A ASSIGN” or
“CTL B ASSIGN,” and press the [VALUE] knob.
6 . Turn the [VALUE] knob to select the function
that you want to assign to CTL A or CTL B of the
footswitch, and press the [VALUE] knob.
Value Explanation
N/A No function is assigned.
A/PGM CH SEL
1–8
Selects the video of the specified input
channel as the video sent to the A/PGM bus.
B/PST CH SEL 1–8
Selects the video of the specified input
channel as the video sent to the B/PST bus.
AUX CH SEL 1–8
Selects the video of the specified input
channel as the video sent to the AUX bus.
INPUT 1–8
ASSIGN
Switches the source of the specified input
channel.
STILL 1–8
OUTPUT
Switches the output video to the specified
still image.
PinP 1 SRC HDMI
1–8
Switches the video shown in the PinP 1 inset
screen to the video of the specified input
channel.
PinP 1 SRC STILL
1–8
Switches the video shown in the PinP 1 inset
screen to the specified still image.
PinP 2 SRC HDMI
1–8
Switches the video shown in the PinP 2 inset
screen to the video of the specified input
channel.
PinP 2 SRC STILL
1–8
Switches the video shown in the PinP 2 inset
screen to the specified still image.
DSK SOURCE
HDMI 1–8
Switches the source image for DSK
compositing to the video of the specified
input channel.
Value Explanation
DSK SOURCE
STILL 1–8
Switches the source image for DSK
compositing to the specified still image.
CUT SW The same function as the [CUT] button.
AUTO SW The same function as the [AUTO] button.
TRANSITION SW
The same function as the [TRANSITION]
button.
MODE SW The same function as the [MODE] button.
SPLIT/VFX A SW The same function as the SPLIT/VFX [A] button.
SPLIT/VFX B SW The same function as the SPLIT/VFX [B] button.
PinP 1 PVW SW The same function as the PinP 1 [PVW] button.
PinP 1 ON SW The same function as the PinP 1 [ON] button.
PinP 2 PVW SW The same function as the PinP 2 [PVW] button.
PinP 2 ON SW The same function as the PinP 2 [ON] button.
DSK PVW SW The same function as the DSK [PVW] button.
DSK ON SW The same function as the DSK [ON] button.
USER 1 SW The same function as the USER [1] button.
USER 2 SW The same function as the USER [2] button.
H AUTO TAKE I
Switches the video between A/PGM bus and
B/PST bus.
H CUT I
Switches the video between A/PGM bus and
B/PST bus as a cut.
INPUT 1–8 AUDIO
MUTE
Turns the mute function on/off for the audio
of the specified input channel.
AUDIO IN AUDIO
MUTE
Turns the mute function on/off for AUDIO
IN audio.
AUDIO OUTPUT
MUTE
Turns the mute function on/off for AUDIO
OUT audio.
AUDIO AUX
MUTE
Turns on/off the mute function for AUX-bus
audio.
INPUT 1–8 AUDIO
SOLO
Turns the solo function on/off for the audio
of the specified input channel.
OUTPUT FADE
LEFT
The same function as turning the [OUTPUT
FADE] knob to the left.
OUTPUT FADE
RIGHT
The same function as turning the [OUTPUT
FADE] knob to the right.
LOAD MEMORY
1–8
Recalls the specified preset memory.
INPUT SCAN
NORMAL
Consecutively switches the input video in the
order of INPUT 1 0 8 each time you press.
INPUT SCAN
REVERSE
Consecutively switches the input video in the
order of INPUT 8 0 1 each time you press.
MEMORY SCAN
NORMAL
Consecutively switches the preset memory
in the order of 1 0 8 each time you press.
MEMORY SCAN
REVERSE
Consecutively switches the preset memory
in the order of 8 0 1 each time you press.
7 . Press the [MENU] button to quit the menu.
Using a Footswitch
You can use a footswitch connected to the CTL/EXP 1, 2 jacks of the V-8HD to control the V-8HD with your foot.
You can assign various functions to the footswitch.