Roland Aerophone Pro Digital Wind Instrument - Manual (Page 20)

20
Making Settings in the Menu
Assigning a continuously-variable controller
For breath (the strength of your breath), bite (the strength at which you bite the reed), thumb lever, thumb pad, and motion specify the following
parameters.
* Indications of “***” in the table will contain the following names.
Breath_1–8, BiteDn_1–4, BiteUp_1–4, LeverDn_1–2, LeverUp_1–2, ThumbPad_1–4, Motion_1–2
* For controllers whose Func parameter is “Off,” their parameters related to the assign settings are not shown.
Parameter Indication Value Explanation
Assign Function *** Func
& “Aerophone Pro
Parameter Guide” (PDF)
Specify the function that is assigned to a continuously-operated controller.
Input Min Value *** In Min
0–127
Specify the minimum value (Min)
and maximum value (Max) in which
controller operations are effective. & “Function assignment (continuous
operation)” (p. 17)
Input Max Value *** In Max
Output Min Value *** Out Min
0–127
Specify the minimum value (Min)
and maximum value (Max) in which
the assigned function operates. Output Max Value *** Out Max
Mode *** Mode Momentary, Latch
Specifies the operation mode.
Latch
Each operation switches between Output Min Value and
Output Max Value.
The switch occurs at the mid-point value between Input Min
Value and Input Max Value.
Momentary
The function operates like a graph (p. 17), according to how
you operate the controller.
Curve *** Curve
Specifies the operation curve when the operation mode is Momentary.
1: Linear 2: Exp L 3: Exp M1 4: Exp M2 5: Exp H 6: Log L 7: Log M1 8: Log M2 9: Log H
10: S-Shape 11: Reverse S 12: Step
Assigning a switch-type controller
For the [S1] / [S2] buttons and the side keys, specify the following parameters.
* Indications of “***” in the table will contain the following names.
S1_1–2, S2_1–2, X_1–2, C1_1–2, C2_1–2, C3_1–2, C4_1–2, C5_1–2, Tc_1–2, Ta_1–2
* For controllers whose Func parameter is “Off,” their parameters related to the assign settings are not shown.
Parameter Indication Value Explanation
Assign Function *** Func
& “Aerophone Pro
Parameter Guide” (PDF)
Assign the function that is output via MIDI when you operate each
controller.
Release Value *** Release Val
0–127
Specify the value when you take your finger off the button (Release) and the
value when you press the button (Press). Press Value *** Press Val
Mode *** Mode Momentary, Latch
Specifies the operation mode.
Latch
Each time you press the button, the Press Value and
Release Value alternate.
Momentary
The Press Value is applied while the button is pressed,
and the Release Value is applied while the button is
released.