Roland Aerophone Pro Digital Wind Instrument - Manual (Page 18)

18
Making Settings in the Menu
Example 1
127
127
Operation of
function
0
Performer’s
action
Output
Min
Value = 0
Output
Max
Value = 127
Input Max Value = 127 Input Min Value = 0
Curve=1: Linear
127
127
Operation of
function
0
Performer’s
action
Output
Min
Value = 100
Output
Max
Value = 0
Input Max Value = 127 Input Min Value = 30
Curve=2: Exp L
30
100
Example 2
* If Output Min is larger than Output Max, the
Curve is vertically inverted.
Assigning a switch-type controller
For the [S1] / [S2] buttons and the side keys, specify the following parameters.
* Indications of “***” in the table will contain the following names.
S1_1–2, S2_1–2, X_1–2, C1_1–2, C2_1–2, C3_1–2, C4_1–2, C5_1–2, Tc_1–2, Ta_1–2
* For controllers whose Func parameter is “Off,” their parameters related to the assign settings are not shown.
Parameter Indication Value Explanation
Assign Function *** Func
& “Aerophone Pro
Parameter Guide” (PDF)
Specifies the function that is assigned when each controller is pressed.
Release Value *** Release Val
0–127
Specify the value when you take your finger off the button (Release) and the
value when you press the button (Press). Press Value *** Press Val
Mode *** Mode Momentary, Latch
Specifies the operation mode.
Latch
Each time you press the button, the Press Value and
Release Value alternate.
Momentary
The Press Value is applied while the button is pressed,
and the Release Value is applied while the button is
released.