Roland FANTOM-7 76-Note Workstation Keyboard - Manual (Page 8)

8
Turning on the Power
* Once everything is properly connected, be sure to follow the procedure
below to turn on their power. If you turn on equipment in the wrong
order, you risk causing malfunction or equipment failure.
1.
Minimize the volume of this unit.
Also completely turn down the volume of any connected external devices.
2.
Press the [ L ] switch.
The unit is turned on, and the display’s backlighting comes on.
3.
Turn on the power to connected external devices.
4.
Adjust the volume of the connected external devices.
5.
Adjust the volume of this unit.
Turning off the Power
1.
Minimize the volume of this unit.
Also completely turn down the volume of any connected external devices.
2.
Turn off the power of the connected external devices.
3.
Press the [ L ] switch.
The unit is turned off.
* Before turning the unit on/off, always be sure to turn the volume down.
Even with the volume turned down, you might hear some sound when
switching the unit on/off. However, this is normal and does not indicate
a malfunction.
* If you need to turn off the power completely, first turn off the unit, then
unplug the power cord from the power outlet. Refer to “To completely
turn off power to the unit, pull out the plug from the outlet”
(p. 2).
Making the Power Automatically Turn off After a Time
(Auto Off)
The power to this unit will be turned off automatically after a predetermined amount
of time has passed since it was last used for playing music, or its buttons or controls
were operated (Auto Off function).
If you do not want the power to be turned off automatically, disengage the Auto
Off function.
NOTE
5 Unsaved data is lost when the power turns off. Any data that you want
to keep must be saved in advance.
5 To restore power, turn the power on again.
Changing the Auto Off Setting
1.
Press the [MENU] button.
The MENU screen appears.
2.
Touch .
The SYSTEM screen appears.
3.
Touch .
4.
Select “Auto Off” and change the setting.
Parameter Value Explanation
Auto Off
Off The power will not turn off automatically.
30 min
The power will automatically turn off if no
operation is performed for 30 minutes.
240 min
(default)
The power will automatically turn off if no
operation is performed for 240 minutes
(four hours).
5.
If you want to store the auto-off setting, press the [WRITE]
button in the System screen.
Introduction