Roland FANTOM-7 76-Note Workstation Keyboard - Manual (Page 3)

3
USING THE UNIT SAFELY
WARNING
Be cautious to protect children from
injury
Always make sure that an adult is
on hand to provide supervision and
guidance when using the unit in
places where children are present, or
when a child will be using the unit.
Do not drop or subject to strong impact
Otherwise, you risk causing damage
or malfunction.
Do not share an outlet with an
unreasonable number of other devices
Otherwise, you risk overheating or
fire.
Do not use overseas
Before using the unit in overseas,
consult with your retailer, the
nearest Roland service center, or an
authorized Roland distributor.
For a list of Roland service centers
and official Roland dealers, refer to the Roland
website.
Don’t place burning objects on the unit
Don’t place any burning object (such
as a candle) on the unit.
Be aware of weather conditions
Use the apparatus in moderate
climates.
CAUTION
Use only the specified stand(s)
This unit is designed to be used in
combination with specific stands (*1)
manufactured by Roland. If used in
combination with other stands, you
risk sustaining injuries as the result of
this product dropping down or toppling over
due to a lack of stability.
Evaluate safety issues before using
stands
Even if you observe the cautions
given in the owner’s manual, certain
types of handling may allow this
product to fall from the stand, or
cause the stand to overturn. Please
be mindful of any safety issues before using this
product.
When disconnecting the power cord,
grasp it by the plug
To prevent conductor damage,
always grasp the power cord by its
plug when disconnecting it.
Periodically clean the power plug
An accumulation of dust or foreign
objects between the power plug and
the power outlet can lead to fire or
electric shock.
At regular intervals, be sure to pull
out the power plug, and using a dry cloth, wipe
away any dust or foreign objects that may have
accumulated.
Disconnect the power plug whenever
the unit will not be used for an extended
period of time
Fire may result in the unlikely event
that a breakdown occurs.
Route all power cords and cables in such
a way as to prevent them from getting
entangled
Injury could result if someone were to
trip on a cable and cause the unit to
fall or topple.
Avoid climbing on top of the unit, or
placing heavy objects on it
Otherwise, you risk injury as the
result of the unit toppling over or
dropping down.
Never connect/disconnect a power plug
if your hands are wet
Otherwise, you could receive an
electric shock.
Disconnect all cords/cables before
moving the unit
Before moving the unit, disconnect
the power plug from the outlet,
and pull out all cords from external
devices.
CAUTION
Cautions when moving this unit
If you need to move the instrument,
take note of the precautions listed
below. At least two persons are
required to safely lift and move the
unit. It should be handled carefully,
all the while keeping it level. Make sure to have
a firm grip, to protect yourself from injury and
the instrument from damage.
• Disconnect the power cord.
• Disconnect all cords coming from external
devices.
Before cleaning the unit, disconnect the
power plug from the outlet
If the power plug is not removed
from the outlet, you risk receiving an
electric shock.
Whenever there is a threat of lightning,
disconnect the power plug from the
outlet
If the power plug is not removed
from the outlet, you risk causing
malfunction or receiving an electric
shock.
Precautions concerning use of phantom
power supply
Always turn the phantom power
off when connecting any device
other than condenser microphones
that require phantom power.
You risk causing damage if you
mistakenly supply phantom power to dynamic
microphones, audio playback devices, or other
devices that don’t require such power. Be sure
to check the specifications of any microphone
you intend to use by referring to the manual
that came with it.
(This instrument’s phantom power: 48 V DC, 10
mA Max)
*1 FANTOM-6, FANTOM-7: KS-10Z / KS-12, FANTOM-8: KS-10Z / KS-12 / KS-G8B
*2 For details on how to place this unit on a stand, refer to “Reference Manual” (PDF).