Roland FANTOM-7 76-Note Workstation Keyboard - Manual (Page 16)

16
This unit lets you audio-record (sample) your keyboard or the input sound from an
audio device or mic. The recorded sample can be played by pressing a pad.
Playing a Sample by Pressing a Pad
Here we explain how you can use pads [1]–[16] to play sounds that you sampled.
(Sample Pad function)
In advance, select “SAMPLE PAD” as the pad function as described in “Assigning
Convenient Functions to the Pads (PAD MODE)” (p. 16).
1.
Press a pad [1]–[16].
A sample plays.
You can press multiple pads to play them simultaneously.
Playing a Sample Continuously (Hold)
1.
While you hold down a pad, press the [HOLD] button.
The sample continues playing even after you release the pad. To stop the sample,
press the pad once again.
Switching Banks
The samples are assigned to four banks in units of 16 samples. When you switch
banks, the samples assigned to each pad will also switch.
1.
Press the [BANK] button.
2.
Press a pad [1]–[4] to select a bank.
Moving/Copying Samples
You can move or copy a sample to another pad.
Moving a Sample
1.
Hold down the pad of the sample that you want to move, and
press the [CLIP BOARD] button.
2.
Hold down the [CLIP BOARD] button, and press the move-
destination pad.
The sample is moved.
* If there is a sample in the move-destination pad, the message
“Overwrite OK?” appears. Press the [ENTER] button to overwrite, or
press the [EXIT] button to cancel.
Copying a Sample
1.
Hold down the pad of the sample that you want to copy and
the [SHIFT] button; then press the [CLIP BOARD] button.
2.
Hold down the [CLIP BOARD] button and press the copy-
destination pad.
The sample is copied.
* If there is a sample in the copy-destination pad, the message “Overwrite
OK?” appears. Press the [ENTER] button to overwrite, or press the [EXIT]
button to cancel.
Assigning convenient functions to the pads (PAD MODE)
By assigning various functions to the 16 pads, you can use them to select
scenes or play samples.
In addition to playing samples or selecting scenes, you can assign various
convenient functions to the pads.
1.
Press the [PAD MODE] button.
2.
Press a pad [1]–[16] button to select a function.
A setting screen appears according to the function you select.
MEMO
For details on each function, refer to “Reference Manual” (PDF).
Sampler
If you experience stuck notes!
Press the [HOLD] button four times in rapid succession. This stops all sounds
that are being played by the pads.