Yaskawa MP900 Series MPLOGGER - Manual (Page 71)

4.11 Monitoring
4-41
4
4.11.3 Display Update Cycle Setting
Determine the data update interval before starting the automatic update of monitoring dis-
play. Once this parameter is set, there is no need to set it again.
1. Select PLC - Display Update - Cycle Time Setting .
2. The Display Cycle Time Dialog Box will appear.
The default display cycle time is 1 second. It can be set to anything from 1 to 60 seconds.
If the display cycle time is too short, it may cause the display to flicker. Consider the capabilities of
your PC and Excel to determine an appropriate display cycle time.
INFO