Yaskawa MP900 Series MPLOGGER - Manual (Page 63)

4.9 Data Logging Settings
4-33
4
• Sampling Duration
The actual time of data collection can be specified for each tag group. The time must
be in 24 hour format from 00:00 to 00:00.
• Active Check Box
Data is collected for groups for which the Active Check Box is selected. For tags that
are used only occasionally, for example, for testing purposes, select the check box
only when required.
When all items are entered correctly, click the OK Button. The dialog box will close
and the group will be added the Tag Group List .
4. Modifying Tag Groups
To modify a tag group that is already listed, select the desired tag group from the Tag
Group List in the dialog box and click the Modify Button. The Tag Group Properties
Dialog Box will be displayed. It contains the current settings as the default parameter
values. Modify the items and click the
OK Button.
5. Deleting Tag Groups
To delete a tag group, select the desired tag group from the Tag Group List in the dialog
box and click the Delete Button. A confirmation message will appear and the tag group
will be deleted.
Deleting a tag group will delete all the tags in the tag group. (Tags used for monitoring will not be
deleted.) When a tag group is deleted, the internal ID changes so that you cannot add the exact same
tag group again. This implies that when you are collecting trend data, you will not be able to continue
from the previous data points.
Unless it is absolutely unnecessary, it is recommended that you deselect the collection check box rather
than delete the tag group.
6. Saving Tag Groups
When all the tag groups have been added to the list, click the OK Button to save them.
Until the OK Button is clicked, any tag group information that has been added or modi-
fied since the dialog box that was opened can be cancelled. If the dialog box is closed
without saving the data, the data will be lost.
INFO