Yaskawa MP900 Series MPLOGGER - Manual (Page 103)

9-1
9
9
Communication Manager Settings
This chapter describes how to set up the Communication Driver (Communica-
tion Manager) when connecting a PC (Windows) and a Yaskawa controller
(MP/CP Series).
MPLOGGER uses CimScope as the Communication Driver to communicate
with the controllers. It consists of a Communication Manager and an interface.
CimScope allows the controllers to be controlled from the PC. If the MPE720
Programming Development Tool is already installed, there is no need to install
CimScope. This chapter describes how to set up the Communication Manager.
9.1 Starting the Communication Manager - - - - - - - - - - - - - - - - - 9-2
9.2 Serial (MEMOBUS) Communications Settings - - - - - - - - - - 9-4
9.3 CP-218 (Ethernet) Communications Setting - - - - - - - - - - - - 9-7
9.4 Saving the Settings - - - - - - - - - - - - - - - - - - - - - - - - - - - - 9-11