Yaskawa MP900 Series MPLOGGER - Manual (Page 119)

Appendix A
A.1.3 Parameter Details
A-4
A.1.3 Parameter Details
„ Process Result (PARAM00)
Outputs the process result to the upper bytes. The lower bytes are for system analysis.
• 00xx: BUSY
• 10xx: COMPLETE
• 8xxx: ERROR
„ Status (PARAM01)
Outputs the status of the transmitter.
Bit Assignments
REQUEST
1 = Request
0 = Notification that Reception is Completed
Error
code
Error Description
81xx Function code error An invalid function code was sent or received.
82xx Address setting error The data address, coil offset, input relay offset, input register offset, or
holding register offset is out of range.
83xx Data size error The amount of sent or received data is out of range.
84xx Circuit number setting error The circuit number is out of range.
85xx Channel number setting error The channel number is out of range.
86xx Station address error The station number is out of range.
88xx Transmitter error An error response was returned from the transmitter.
89xx Device option error An invalid device was selected.
PARAMETER
COMMAND
RESULT
REQUEST
F 7 8 6 5 4 3 2 1 0 9 A B C D E