Yaskawa MP900 Series MPLOGGER - Manual (Page 58)

4 Basic Operation
4.8.1 Creating a Cell Setup Report
4-28
4.8.1 Creating a Cell Setup Report
1. Select PLC - Tool - Create Cell Setup Report .
2. A progress window dialog box will be displayed as shown below.
3. A report will be created for each driver in the workbook. The name XXXXXCell Setup
Report will be assigned to each sheet.
The cell properties for one cell will be displayed in one row.
Clicking on the cell name will transfer you to the cell.
Displayed items: Value, Cell Name, Sheet Name, Cell Address, Logical Port, Device
Name, CPU No., Register Type, Address Code, Address No., Data
Type, Bit, and R/W Selection