Yaskawa MP900 Series MPLOGGER - Manual (Page 65)

4.9 Data Logging Settings
4-35
4
• Addressing Scheme
Specifies the addressing Scheme.
Register Number and Reference Number can selected. The register type and address
depends on the addressing scheme.
• Register Type
Select the desired register type of the controller.
• Address
Specifies the address within each register type.
The range of addresses that can be used depends on the controller. If the register type
is MB or IB, the bit number must be added to end of the address when specifying reg-
ister numbers.
Note: If the register type is IB, IW, IL, or IF, the address must be written as
a decimal number.
• Data Type
Specifies the data format of data in the controller.
For information on data types, refer to
6.3 Supported Data Formats .
• Bit
Only applicable if the specified data type is BOOL.
Hexadecimal numbers from 0 to F can be entered.
3. Modifying Existing Tags
To modify the properties of an existing tag, select the desired tag from the tag list and
modify the items in the top half of the dialog box. Click the
Modify Button to update the
tag in the tag list.
4. Deleting Tags
To delete a tag from a tag group, select the tag from the tag list and click the Delete But-
ton. A confirmation message will appear and the tag will be deleted from the tag list.
Example: 001B
Bit number Address