Canon PowerShot G3 X - Manual (Page 175)

175
Appendix
Index
Before Use
Basic Guide
Advanced Guide
Camera Basics
Auto Mode /
Hybrid Auto Mode
Other Shooting Modes
P Mode
Tv, Av, M, C1, and C2 Mode
Playback Mode
Wi-Fi Functions
Setting Menu
Accessories
3
Choose shooting mode [ ], [ ],
[ ], or [ ].
z Flash settings can only be configured in
these modes. In other modes, the flash
is adjusted and fired automatically, as
needed.
4
Configure the external flash.
z Press the [ ] button, choose [Flash
Control] on the [ 5] tab, and then press
the [ ] button.
z Options already set on the flash itself are
displayed.
z Press the [ ][ ] buttons or turn the [ ]
dial to choose an item, and then set the
desired option.
z Available items vary depending on the
shooting mode and the flash attached
(= 176).
● Settings for the built-in flash cannot be configured while a
Speedlite EX series flash is attached, because that setting screen
is no longer accessible.
● You can also access the setting screen by pressing the [ ] button
for at least one second.
● 600EX-RT/580EX II only: [Flash Control] is not available if the
external flash has been set up for stroboscopic flash.
● 320EX only: Auto LED lighting is only available in low-light movie
recording or in Movie mode. In this case, the [ ] icon is shown.
Using an External Flash (Sold Separately)
Still Images Movies
More sophisticated flash photography is possible with an optional
Speedlite EX series flash. For movie shooting using an LED light, the
optional Speedlite 320EX flash is available.
● This camera does not support some Speedlite EX series
functions.
● Non-EX series Canon flash units may not fire correctly or may not
fire at all, in some cases.
● Use of non-Canon flash units (especially high-voltage flash units)
or flash accessories may prevent normal camera operation and
may damage the camera.
● Also refer to the Speedlite EX series manual for additional
information.
Speedlite EX Series
Still Images Movies
These optional flash units can provide bright lighting and meet a variety of
flash photography needs.
1
Attach the flash.
z Make sure the camera is off, and then
attach the flash unit to the hot shoe.
2
Turn the flash on, and then turn the
camera on.
z A red [ ] icon is now displayed.
z The flash pilot lamp will light up when the
flash is ready.