Canon PowerShot G3 X - Manual (Page 101)

101
Playback Mode
Wi-Fi Functions
Setting Menu
Accessories
Appendix
Index
Before Use
Basic Guide
Advanced Guide
Camera Basics
Auto Mode /
Hybrid Auto Mode
Other Shooting Modes
P Mode
Tv, Av, M, C1, and C2 Mode
Recording Movies at Specific Shutter
Speeds and Aperture Values
Still Images Movies
Set your preferred shutter speed, aperture value, and ISO speed.
For details on available shutter speeds, aperture values, and ISO speeds,
see “Shutter Speeds” (= 214), “Aperture” (= 214), and “Changing the
ISO Speed” (= 80).
1
Enter [ ] mode.
z Set the mode dial to [ ].
z Press the [ ] button, choose [ ] in the
menu, and then choose [ ] (= 30).
2
Configure the settings.
z Press the [ ] button to choose whether
to configure shutter speed or ISO speed,
and then turn the [ ] dial to set the
value.
z Turn the [ ] dial to set the aperture
value.
3
Shoot.
z Press the movie button.
z During recording, you can switch the
setting to configure by pressing the [ ]
button repeatedly and adjust the value by
turning the [ ] ring.
● Some shutter speeds may cause flickering on the screen when
recording under fluorescent or LED lighting, which may be
recorded.
Adjusting the Flash Output
Still Images Movies
Choose from the three flash levels in [ ][ ][ ] modes.
1
Specify the flash mode.
z Press the [ ] button, choose [Flash
Control] on the [ 5] tab, and then press
the [ ] button (= 31).
z Press the [ ][ ] buttons to choose
[Flash Mode], and then press the [ ]
button.
z Press the [ ][ ] buttons to choose
[Manual], and then press the [ ] button.
2
Configure the setting.
z Raise the flash, press the [ ] button and
immediately turn the [ ] dial to choose
the flash level, and then press the [ ]
button.
z Once the setting is complete, the flash
output level is displayed.
[ ]: Minimum, [ ]: Medium, [ ]:
Maximum
● You can also set the flash level by accessing MENU (= 31)
and choosing [
5] tab ► [Flash Control] ► [Flash Output].
● You can also access the [Flash Control] screen (= 31) as follows.
- Press and hold the [ ] button for at least one second.
- When the flash is up, press the [ ] button and immediately
press the [
] button.
● You can also access the [Flash Control] MENU screen (= 31)
by raising the flash, pressing the [ ] button, and touching [
].