Edimax Technology AR-7266WNA - Manual (Page 96)

87
You may need to define routes if your home setup includes two or more networks
or subnets, if you connect to two or more ISP services, or if you connect to a
remote corporate LAN.
Parameter Description
Enable Check to enable the selected route or route to be added.
Destination The destination can be specified as the IP address of a
subnet or a specific host in the subnet. It can also be
specified as all zeros to indicate that this route should be
used for all destinations for which no other route is
defined (this is the route that creates the default
gateway).
Subnet Mask The network mask of the destination subnet. The default
gateway uses a mask of 0.0.0.0.
Next Hop The IP address of the next hop through which traffic will
flow towards the destination subnet.