Edimax Technology AR-7266WNA - Manual (Page 66)

57
Channel Number It is the radio channel used by the wireless LAN. All
devices in the same wireless LAN should use the same
channel. Please select the country you are located and
designate a channel that the router will use. If you want
to let the router automatically to find an available channel
with the highest signal strength, please select “Auto”.
Radio Power (mW) Set the maximum output power of the router. The higher
output power, the wider coverage range.
Associated Clients Click “Show Active Clients” button and you can see the
wireless clients connected to the router.
When you finish, click ‘Apply Changes’. You’ll see the following message
displayed on web browser:
Press ‘Continue’ to save the settings made and back to web management
interface; press ‘Apply’ to save the settings made and restart the router so the
settings will take effect after it reboots.
5.2.4.2. Advanced Settings
This page allows advanced users who have sufficient knowledge of wireless LAN.
These setting shall not be changed unless you know exactly what will happen for
the changes you made on your router.