Edimax Technology AR-7266WNA - Manual (Page 39)

30
Parameter Description
SNMP Select “Disable” or “Enable” to disable or enable the
SNMP feature.
System Description Enter the system description of the router.
System Contact Enter the contact person and/or contact information for
the router.
System Name Assign an administratively name for the router.
System Location The physical location of the router.
System Object ID It is the vendor object identifier. The vendor’s
authoritative identification of the network management
subsystem contained in the entity.
Trap IP Address Destination IP address of the SNMP trap.
Community name
(read-only)
Name of the read-only community. This read-only
community allows read operation to all objects in the
MIB.
Community name
(write-only)
Name of the write-only community. This write-only
community allows write operation to the objects defines
as read-writable in the MIB.
When you finish, click ‘Apply Changes’. You’ll see the following message
displayed on web browser: