Edimax Technology AR-7266WNA - Manual (Page 84)

75
belong to the default group, and the other four groups are all empty. It is possible
to assign any interface to any group but only one group.
Parameter Description
Disabled/ Enabled Click the radio button to enable or disable the feature. If
disabled, all interfaces belong to the default group.
Interface groups To manipulate a mapping group:
1. Select a group from the table.
2. Select interfaces from the available/grouped interface
list and add it to the grouped/available interface list using
the arrow buttons to manipulate the required mapping of
the ports.
3. Click “Apply Changes” button to save the changes.