Edimax Technology AR-7266WNA - Manual (Page 107)

98
Parameter Description
Select PVC Select the PVC channel you want to do the loop-back
diagnostic.
Flow Type The ATM OAM flow type. The selection can be F5 Segment or
F5 End-to-End. ATM uses F4 and F5 cell flows as follows:
F4: used in VPs
F5: used in VCs
Loopback
Location ID
The loop-back location ID field of the loop-back cell. The
default value is all 1s (ones) to indicate the endpoint of the
segment or connection.
Click “Go!” to save the setting to the configuration.