Edimax Technology AR-7266WNA - Manual (Page 113)

104
4. I forget my login username and/or password.
STEPS CORRECTIVE ACTION
1 If you have changed the password and have now forgotten it, you
will need to upload the default configuration file. This will erase all
custom configurations and restore all of the factory defaults
including the password.
2 Press the Reset/WPS button for over five seconds, and then
release it. When the Power LED begins to blink, the defaults
have been restored.
3 The default username is “admin”. The default password is “1234”.
The Password and Username fields are case-sensitive. Make
sure that you enter the correct password and username using the
proper casing.
4 It is highly recommended to change the default username and
password. Make sure you store the username and password in a
save place.
5. I cannot access the Web Management of the router after activating the ACL
function.
STEPS CORRECTIVE ACTION
1 When ACL is activated, you have to set the ACL rule for allowing
some users to use some services. Check if you have set the
rules. If not, all the users are forbidden using any of service from
LAN or WAN.
2 If you cannot access the Web Management of the router, please
press the Reset/WPS button over 5 seconds to restore to
defaults.
3 After the router is restarting, log in the router with the default IP
Address 192.168.2.1.