Edimax Technology AR-7266WNA - Manual (Page 43)

34
Encapsulation Please check with your ISP the method of multiplexing.
Channel Mode There are five kinds of channel modes you can select for
ADSL connection. Please check with your ISP the
method of the ADSL connection.
Enable NAPT Enable or disable NAPT. NAPT, an Internet standard that
enables a local-area network (LAN) to use one set of IP
addresses for internal traffic and a second set of
addresses for external traffic. When NAPT is enabled,
the router will help to make all necessary IP address
translations for the PC connected to the router to access
the Internet.
Admin Status Enable or disable the PVC channel setting.
PPP Setting
User Name Enter the username exactly as your ISP assigned.
Password Enter the password that your ISP has assigned to you.
Type Continuous – The connection will be kept always on. If
the connection is interrupted, the router will re-connect
automatically.
Connect on Demand – Only connect when you want to
surf the Internet. “Idle Time” is set to stop the connection
when the network traffic is not sending or receiving after
an idle time.
Manual – After you have selected this option, please go
to Status page. You will see the “Connect” button, click it
and the router will connect to the ISP. If you want to stop
the connection, please click “Disconnect” button.