ProSoft Technology MVI69-ADM - Manual (Page 91)

MVI-ADM ♦ 'C' Programmable Programming the Module
'C' Programmable Application Development Module Developer's Guide
ProSoft Technology, Inc. Page 91 of 342
February 20, 2013
5 Programming the Module
In This Chapter
 ROM Disk Configuration ........................................................................ 92
 Creating a ROM Disk Image .................................................................. 97
 Downloading a ROM Disk Image .......................................................... 99
 MVIUPDAT ............................................................................................ 99
 MVI System BIOS Setup ..................................................................... 101
 Debugging Strategies .......................................................................... 102
This section describes how to get your application running on the MVI-ADM
module. After an application has been developed using the backplane and serial
API’s, it must be downloaded to the MVI-ADM module in order to run. The
application may then be run manually from the console command line, or
automatically on boot from the AUTOEXEC.BAT or CONFIG.SYS files.