ProSoft Technology MVI69-ADM - Manual (Page 172)

Application Development Function Library - ADM API MVI-ADM ♦ 'C' Programmable
Developer's Guide 'C' Programmable Application Development Module
Page 172 of 342 ProSoft Technology, Inc.
February 20, 2013
ADM_ReadBtCfg
Syntax
int ADM_ReadBtCfg(ADMHANDLE adm_handle, ADM_INTERFACE * adm_interface_ptr, int
verbose)
Parameters
adm_handle Handle returned by previous call to ADM_Open
adm_interface_ptr Pointer to ADM_INTERFACE structure to allow API access to
structures
verbose Switch to enable status messages to the debug port. A 1 will
enable messages and a 0 will disable the messages.
Description
This function reads the module configuration from the processor. The function
will make a call to the function pointed to by
interface.process_cfg_ptr. T he
user function can be used to perform boundary checking on the configuration
parameters.
MVI69 Note
This is a null function for the MVI69.
MVI94 Note
This function is a null function for the MVI94.
Return Value:
ADM_SUCCESS No errors were encountered
ADM_ERR_NOACCESS adm_handle does not have access, or configuration was
interrupted by operator.
ADM_ERR_NOTSUPPORTED This function is not supported on this platform
Example
ADMHANDLE adm_handle;
ADM_INTERFACE *interface_ptr;
int verbose = 1;
ADM_INTERFACE interface;
interface_ptr = &interface;
ADM_ReadBtCfg(adm_handle, interface_ptr, verbose);
See Also
ADM_BtOpen (page 169)