ProSoft Technology MVI69-ADM - Manual (Page 42)

Understanding the MVI-ADM API MVI-ADM ♦ 'C' Programmable
Developer's Guide 'C' Programmable Application Development Module
Page 42 of 342 ProSoft Technology, Inc.
February 20, 2013
If Block Transfer Size = 240:
Warm Boot Block (9998)
This block is sent from the processor to the module (output image) when the
module is required to perform a warm-boot (software reset) operation. The
following table describes the format of the control block.
Offset Description Length
0 9998 1
1 to n Spare n
n=60, 120, or 240 depending on the Block Transfer Size parameter (refer to the configuration file).