beautypg.com

2 control, Control – PLANET IPM-1200x Series User Manual

Page 52

background image

5.4.2 Control

Configuration of this page is allowed when the security level is “Administrator”. It allows user to

change some network ports, and enabled or disabled the function of protocols.

Option

Description

BootP / DHCP Status This is the parameter enabling or disabling the Boot Protocol (BootP)

/ Dynamic Host Configuration Protocol (DHCP) process. These

protocols are used to obtain a dynamic IP address from a BootP /

DHCP server.

PING Echo

Enable/Disable the IP Power Manager to respond to Ping requests.

Network Upgrade

This is the parameter enabling or disabling the Trivial File Transfer

Protocol (TFTP) upgrade control. You can use the provided upgrade

utility on Windows via TFTP to upgrade the IP Power Manager

firmware.

Telnet Connection

This is the parameter enabling or disabling the terminal to the server

application (Telnet) control process. (e.g. telnet 192.168.1.1). The

user may configure the Telnet protocol to use a port number other

than the standard Telnet port (23).

HTTP Support

Enable/Disable the HTTP connection with the IP Power Manager.

The user may configure HTTP protocol to use a port number other

than standard HTTP port (80).

SNMP Support

Enable/Disable the SNMP connection with the IP Power Manager.

The user may configure the SNMP protocol to use a port number other

than the standard SNMP port (161).

- 47 -

User’s Manual of IPM-1200x Series