PLANET IPM-1200x Series - Manual (Page 38)

Option
Description
Configure Inlet
Voltage (V) The current input voltage in Volt.
Current (A) The current input currents in Amp.
Frequency (Hz) The current input frequency in Hz.
Voltage Threshold
High (Volt)
High threshold of input voltage. When input voltage is higher than this
value, IP Power Manager will take action specified in the "Inlet Events
Action" table.
Voltage Threshold
Low (Volt)
Low threshold of input voltage. When input voltage is lower than this
value, IP Power Manager will take action specified in the "Inlet Events
Action" table.
Inlet Events Action
Input Voltage Over
Threshold High
Turn off selected outlets or digital outputs will occur when the input
voltage over high set point.
Input Voltage Under
Threshold Low
Turn off selected outlets or digital outputs will occur when the input
voltage under low set point.
Option Description
Configure Outlet
Outlet Name Set the name of this outlet.
Location Set the name of the location of this outlet.
Power On Delay
(Secs)
Set power on delay time in seconds. The outlet will turn on after the
delay time.
Power Off Delay Set power off delay time in seconds. The outlet will turn off after the
- 33 -
User’s Manual of IPM-1200x Series