PLANET IPM-1200x Series - Manual (Page 13)

1.5 Physical Description
Front View
Component Description
Input power status
indicator
Display power status for the input power G1.
Output power
status
indicator (A ~ L)
Display power status for each power outlet A through L.
Gray: power off
Green: power on
Red: power fault
Status indicator
Display input current, voltage, frequency, error code and the
number of Daisy-chaining. Please refer to “Error codes” under
the appendix for a list of all error codes.
Daisy-chaining
Mode DIP Switch
(C-link DIP)
Set the mode of Daisy-chaining for IP POWER MANAGER.
Auto mode: For the master IP Power Manager, set all the DIP
switches of the C- link to ON by moving all the switches
downward; for all the other IP Power Manager in the Daisy
Chain, set all the DIP switches of the C- link to OFF by moving
all the switches upward. After setting the DIP switches for all the
IP Power Manager in the Daisy Chain, the Daisy Chain ID can
be assigned for each IP Power Manager automatically.
Manual mode: The Daisy Chain ID for all IP Power Manager is
assigned by user manually. Please refer to DIP Switch Setting
Table on page 15.
Reset button
Enable you to reset the IP Power Manager in case the system
locks up.
- 8 -
User’s Manual of IPM-1200x Series