PLANET IPM-1200x Series - Manual (Page 18)

After connecting to EMD, open a browser from a PC in the network. The temperature and
humidity status is automatically displayed on the IP Power Manager Status page.
Step 9 Connecting The Console
You can control the output devices and manage their power status through the console port
with serial connection. Use the bundled serial cable to connect the COM port of your PC and
the CONSOLE port of the IP Power Manager as shown. Then you can run Hyper Terminal to
control and manage your IP Power Manager.
Step 10 Connecting LAN or WAN
The IP Power Manager has an RJ-45 LAN connector that enables you to monitor and
manage the power outlets and digital outputs over the network. The IP Power Manager has a
graphic user interface that allows you to control the device through a web browser. Connect
the IP Power Manager to a free port on your switch using an Ethernet cable. You can then
control the IP Power Manager from your PC or laptop. When the network has installed a
router, you can also use your mobile phone or PDA that is web browser supported and
- 13 -
User’s Manual of IPM-1200x Series