PLANET IPM-1200x Series - Manual (Page 36)

Chapter 5 Web Configuration
The IP Power Manager provides a graphic user interface that can be viewed from a web browser
such as Internet Explorer. This enables you to access and control the IP Power Manager outlets
and subsequently, it’s output devices remotely from your desktop, laptop, PDA, or even your
mobile phone. This section provides instructions about how to use the web interface to configure
and control the IP Power Manager remotely.
1. Open your web browser.
2. Enter the IP address of your IP Power Manager in the address field.
3. A User Name and Password dialog box will appear. Please enter your User Name and
Password here. Default User Name and Password are both “ admin”. Click OK.
4. Then you will see the HOME screen as below.
The left panel provides five options, Power Management, Environment (when EMD
connected), System, Network and Logs.
When you click the IP Power Manager front panel on the Home screen. You will see the device
status as below.
- 31 -
User’s Manual of IPM-1200x Series