PLANET IPM-1200x Series - Manual (Page 10)

Kill the Power
¾ Remote Access
„ Remote power control via TCP/IP and a built in 10/100 Mbps Ethernet port
„ Comprehensive power management and flexible configuration through web
browser, NMS, Telnet, SNMP, or HyperTerminal (console)
„ Multi browser support (IE, Google, Firefox, Safari, Opera, Netscape)
¾ Management
„ To calculate the power consumption on hourly basis, and have an accumulation of
daily
„ Provide detail data-logging for statistical analysis and diagnostic then auto email
daily history report
„ Event notification by pop-up/Sending Trap or E-Mail for events notification
„ Set over-current watchdog for each outlet
„ Power-on sequencing -Intelligently turn on/off devices based on event occurrence
or planned schedule
„ Supports Management Information Base (MIB) files for SNMP
„ Upgrade utility for easy firmware upgrade
¾ Security
„ Support Secure Socket Layer V3 and Secure Shell V1 protocols
„ Administrator and multiple users with password protection for double-layer
security
„ IP Filter -Address-specific IP security masks to prevent unauthorized access
1.4 Product Specification
Product IPM-12001
Hardware Specification
Output Power Port 12
Input Power Port 1
Network Connector 1 x RJ-45 port for 10/100Base-TX
Console Port 1 x RS-232 RJ-45 serial port
Digital Output 2
Daisy chaining Port 2 x USB 2.0
- 5 -
User’s Manual of IPM-1200x Series
IPM-12002
„ Supports multiple power control methods – Wake on LAN, System After AC Back,