PLANET IPM-1200x Series - Manual (Page 17)

Step 6 Connecting Output Device
The IP Power Manager has eight power outlets for connecting devices such as workstations,
servers, and printers. Their power on/off status can be controlled manually as well as
remotely through the LAN and Console ports. Connect the power connectors of the devices
to each of the power outlets A through H with the power cords supplied with the devices as
shown:
Step 7 Connecting Digital Outputs
The IP Power Manager provides two digital outputs (NO by default) to which you can connect
indicators or other output devices that are normally open (NO) or normally closed (NC). The
digital output connectors are work as a switch to let you switch the connected device On or
Off. The connectors will not provide power to the connected device. So the connected device
should connect with its power adapter. You can control the digital outputs remotely through
the console or over the LAN.
Step 8 Connecting EMD
An environmental monitoring device that is sensors connected to for detecting temperature,
humidity, water level, and so on can be connected to the IP Power Manager with the console
port. The EMD can also be connected to alarms or indicators and controlled through the IP
Power Manager. Connect the EMD to the console port as shown:
- 12 -
User’s Manual of IPM-1200x Series