PLANET WNAP-7205 - Manual (Page 45)

User’s Manual of WNAP-7205
Antenna Switch Select Internal antenna or External antenna for using.
The default is using Internal antenna.
Wireless Mode Click to select Wireless Mode from pull down menu.
There are 4 options available:
AP
AP Client (Universal Repeater Mode)
AP+WDS (WDS Repeater Mode)
WDS (WDS Bridge Mode)
Wireless Band Click to select Wireless Band from pull down menu.
There are 3 options available:
802.11a(5G)
802.11a/n mixed
802.11n(5G)
SSID It is the wireless network name. The SSID can be 32 bytes long.
User can use the default SSID or change it.
Multiple SSID 1~3 There are 3 multiple SSIDs available. Enter their descriptive names that
you want to use.
Broadcast Network
Name (SSID)
Enable or disable the SSID broadcast function.
AP Isolation Wireless network is similar to the virtual local area network. All of the
Wireless client devices can access each other completely.
When you enable this function, it will turn off connection between
wireless clients. Only allows connection between wireless client and
this AP router.
MBSSID AP Isolation
Enable this function will turn off connection between clients with
different MBSSID. Example: The client connected with BSSID 1. When
enable this function, it will not connect with BSSID 2. Only can access
between clients with SSID 1.
BSSID
Show the MAC address of Wireless interface.
Frequency (Channel)
Select the wireless communication frequency/channel from pull-down
menu.
Operating Mode
Select “Mixed Mode” for 11a/n mode or “Green Field” for 11n mode.
- 45 -