PLANET WNAP-7205 - Manual (Page 16)

User’s Manual of WNAP-7205
2.3 The Rear Panel – Port & Connector
Figure 2-2 Port and Connector of WNAP-7205
Figure 2-3 Port and Connector description label
Interface Function
RP-SMA Connector
For external antenna. You can use the RP-SMA connector to connect
with 5GHz external antenna.
LAN
The RJ-45 sockets allow LAN connection through Category 5 cables.
Support auto-sensing on 10/100M speed and half/ full duplex; comply
with IEEE 802.3/ 802.3u respectively.
WAN
The RJ-45 socket allows WAN connection through a Category 5 cable.
Support auto-sensing on 10/100M speed and half/ full duplex; comply
with IEEE 802.3/ 802.3u respectively.
1. For External Antenna Mode, you MUST physically attach antenna before power
on.
2. For using external antenna, you should configure the Antenna Switch from
“Internal” to “External” via Web UI.
- 16 -