PLANET VRT-420N - Manual (Page 57)

Configure [Administration Interface] Settings based on the instructions listed below.
Language Select the language of administration Interface you wish to use.
Administrator Password
Maximum input is 36 alphanumeric characters (case sensitive)
* Please change the administrator’s password if the remote
management is enabled. Otherwise, a malicious user can access
the management interface. This user can then have the ability to
change the settings and damage your network access.
Re-type Password Enter the password again to confirm.
Remote Management
Select Enable to enable Remote Management.
Select Disable to disable Remote Management
Management Port HTTP port which users can connect to. (default port is 8080)
Configure [Configuration] Settings based on the instructions listed below
Configuration Export Click Export to save your current configuration settings in a file.
Default Configuration
Restore
Click Restore to recover the default system settings.
Configuration Import Click Browse and Import to load previous configuration settings.
Configure [Firmware] Settings based on the instructions listed below
Firmware Upgrade Click Browse and Upgrade to upgrade the firmware.
7.2 System Utility
Click on [Admin] – [System Utilities] tab. You will see the following screen.
57