PLANET VRT-420N - Manual (Page 21)

whether the connection is still connected.
If custom host is chosen, the system will generate an ARP broadcast
request to detect whether the connection is still connected.
Custom Detection Host Enter the IP address or domain name of the host to be detected.
4.1.3LAN
The LAN Port screen below allows you to specify a private IP address for your router’s LAN interface.
Parameters Description
Internal IP address Please input the IP address of this router.
IP Address
Designate the Access Point’s IP Address. This IP Address should be
unique in your network. The default IP Address is 192.168.0.1.
Subnet Mask
Specify a Subnet Mask for your LAN segment. The Subnet Mask of the
Access Point is fixed and the value is 255.255.255.0.
Spanning Tree Protocol
If it is enabled, this router will use the spanning tree protocol to prevent
from network loop happened in the LAN ports.
MTU MPLANETum Transmission Unit
4.1.4Routing
Click on [Setup] – [Routing] tab. You will see the following screen.
21