PLANET VRT-420N - Manual (Page 23)

Internal IP Range Set up the internal IP range for this ACL rule.
External IP Range Set up the external IP range for this ACL rule.
Protocol Set up the protocol (TCP or UDP) for the ACL to be enabled.
Service Port Range Set up the Service Port Range (e.g., HTTP is TCP/80) for the ACL to
be enabled.
External Interface Please select which External Interface (WAN1 or WAN2) you want for
a packet to be routed, IF the packet fits the condition of this Routing
rule.
Routing Gateway Set up routing gateway, (default / static), if static gateway been
selected, please assign the gateway IP address in blow.
Gateway IP address For static routing gateway.
For example:
Rule Name SMTP outgoing routing
Enable Enable
Internal IP Range Blank (applied to all)
External IP Range Blank (applied to all)
Protocol TCP
Service Port Range 25:25 (SMTP Port:25)
External Interface WAN1
Rule Name HTTP outgoing routing
Enable Enable
Internal IP Range Blank (applied to all)
External IP Range Blank (applied to all)
Protocol TCP
Service Port Range 80:80 (HTTP Port:80)
External Interface WAN 2
23