PLANET VRT-420N - Manual (Page 20)

Parameters Description
Detection Interval Load balance detection interval. (seconds)
Connection mode Choose Always on/Backup to define this WAN is for load balance
always on, or just for backup.
Backup WAN None
Load Balance Weight The priority is set from 1 to 10. “1” indicates the lowest priority, and “10”
indicates the highest. The system would route according to the ratio of
priority.
Wait Time The time to re-send the request.(seconds)
External Connection Detection Choose Enable/Disable to enable/disable connection detection.
Connection Detection Threshold The system will generate a PING packet to detect whether the
connection is still connected. If the Host is not response for this
threshold value, the system is considered to be WAN lost.
Detection time out How long Load balance detection will seems time out.
Detection Type If gateway is chosen, the system will generate a PING packet to detect
20