PLANET IVC-2002 - Manual (Page 22)

22
Step 3: Please refer to following procedures to remove the Industrial
Ethernet Extender from the track.
2
1
Step 4: Lightly press the button of DIN-Rail for remove it from track.
3.6.2 Wall Mount Plate Mounting
To install the Industrial Ethernet Extender on the wall, please follows
the instructions described below.
Step 1: Remove the DIN-Rail from the Industrial Ethernet Extender;
loose the screws to remove the DIN-Rail.
Step 2: Place the wall mount plate on the rear panel of the Industrial
Ethernet Extender.