PLANET IVC-2002 - Manual (Page 12)

12
2.1.1 LED indicators for IVC-2002
The rich diagnostic LEDs on the front panel can provide the operating
status of individual port and whole system.
System n
LED Color Function
P1 Green Light indicate the power 1 has power
P2 Green Light indicate the power 2 has power
FAULT Green Light
indicate the either power 1 or power 2 has
no power
VDSL / BNC n
LED Color Function
ACT Green
Light Indicate that the VDSL link is established
Blink
Indicate that the VDSL link is actively
sending or receiving data over that port
Sync Green
Light Indicate that the VDSL link is established.
Fast
Blink Indicate that the VDSL link is at training
status (about 10 seconds).
Slow
Blink Indicate that the VDSL link is at idle
status.
Master Green Light
Indicate the VDSL Bridge is running at
Master mode.
Slave Green Light
Indicate the VDSL Bridge is running at
Slave mode.
10/100Base-TX Port n
LED Color Function
LNK/ACT Green
Light Indicate that the port is link up.
Blink
Indicate that the Extender is actively
sending or receiving data over that port.
Off Indicate that the port is link down.