PLANET WGSW-48040HP - Manual (Page 330)

User’s Manual of WGSW-48040HP
The screen in Figure 4-16-7 appears.
Figure 4-16-7: PoE Schedule Screenshot
Please press Add New Rule button to start set PoE Schedule function. You have to set PoE schedule to profile then go back to
PoE Port Configuration, and select “ Schedule” mode from per port “PoE Mode” option then you can indicate which schedule
profile could be apply to the PoE port.
The page includes the following fields:
Object Description
 Profile Set the schedule profile mode. Possible profiles are:
Profile1
Profile2
Profile3
Profile4
 Week Day Allows user to set week day for defining PoE function should be enabled on the day.
 Start Hour Allows user to set what hour does PoE function enables.
 Start Min Allows user to set what minute does PoE function enables.
 End Hour Allows user to set what hour does PoE function disables.
 End Min Allows user to set what minute does PoE function disables.
 Reboot Enable Allows user to enable or disable whole PoE port reboot by PoE reboot schedule.
Please be noticed that if you want to PoE schedule and PoE reboot schedule work
at the same time, please use this function, and don’t use Reboot Only function.
This function offers administrator to reboot PoE device at indicate time if
330