PLANET WGSW-48040HP - Manual (Page 139)

User’s Manual of WGSW-48040HP
Auto-refresh : Check this box to refresh the Page automatically. Automatic refresh occurs every 3 seconds.
: Click to refresh the Page immediately.
4.7.4 CIST Port Configuration
This Page allows the user to inspect the current STP CIST port configurations, and possibly change them as well. The CIST
Port Configuration screen in Figure 4-7-6 appears.
Figure 4-7-6 : STP CIST Port Configuration Page Screenshot
The Page includes the following fields:
Object Description
 Port The switch port number of the logical STP port.
 STP Enabled Controls whether RSTP is enabled on this switch port.
 Path Cost Controls the path cost incurred by the port. The Auto setting will set the path cost
as appropriate by the physical link speed, using the 802.1D recommended
values. Using the Specific setting, a user-defined value can be entered. The
path cost is used when establishing the active topology of the network. Lower
139