PLANET WGSW-48040HP - Manual (Page 12)

User’s Manual of WGSW-48040HP
the PD stops working and it is without response, the WGSW-48040HP will resume the PoE port power and bring the PD back to
work. It will greatly enhance the network reliability through the PoE port resetting the PD’s power source and reduce
administrator management burden.
Scheduled Power Recycling
The WGSW-48040HP allows each of the connected PoE IP cameras to reboot in a specific time each week. Therefore, it will
reduce the chance of IP camera crash resulting from buffer overflow.
PoE Schedule for Energy Saving
Besides being used as an IP Surveillance, the WGSW-48040HP is certainly applicable to construct any PoE network including
VoIP and wireless LAN. Under the trend of energy saving worldwide and contributing to the environmental protection on the
Earth, the WGSW-48040HP can effectively control the power supply besides its capability of giving high watts power. The “PoE
schedule” function helps you to enable or disable PoE power feeding for each PoE port during specified time intervals and it is a
powerful function to help SMB or Enterprise save power and money.
SMTP/SNMP Trap Event Alert
Though most NVR or camera management software offers SMTP email alert function, the WGSW-48040HP further provides
event alert function to help to diagnose the abnormal device owing to whether or not there is a break of the network connection,
loss of PoE power or the rebooting response by PD Alive Check process.
Robust Layer 2 Features
The WGSW-48040HP can be programmed for advanced switch management functions such as dynamic Port link aggregation,
Q-in-Q VLAN, private VLAN, Multiple Spanning Tree protocol (MSTP), Layer 2 to Layer 4 QoS, bandwidth control and
IGMP/MLD Snooping. The WGSW-48040HP provides 802.1Q Tagged VLAN, and the VLAN groups allowed will be maximally
12