PLANET WGSW-48040HP - Manual (Page 162)

User’s Manual of WGSW-48040HP
162
 VLAN ID VLAN ID of the group.
 Group Group address of the group displayed.
 Port Switch port number.
 Mode Indicates the filtering mode maintained per (VLAN ID, port number, Group
Address) basis. It can be either Include or Exclude.
 Source Address IP Address of the source. Currently, system limits the total number of IP source
addresses for filtering to be 128.
 Type Indicates the Type. It can be either Allow or Deny.
 Hardware Filter/Switch Indicates whether data plane destined to the specific group address from the
source IPv4 address could be handled by chip or not.
Buttons
Auto-refresh : Check this box to enable an automatic refresh of the Page at regular intervals.
: Click to refresh the Page immediately.
: Updates the table, starting with the first entry in the IGMP Group Table.
: Updates the table, starting with the entry after the last entry currently displayed.