PLANET WGSW-48040HP - Manual (Page 26)

User’s Manual of WGSW-48040HP
Step 6: Proceed with Steps 4 and 5 of session 2.2.1 Desktop Installation to connect the network cabling and supply power to the
Managed Switch.
2.2.3 Installing the SFP Transceiver
The sections describe how to insert an SFP transceiver into an SFP slot. The SFP transceivers are hot-pluggable and
hot-swappable. You can plug in and out the transceiver to/from any SFP port without having to power down the Managed Switch,
as the Figure 2-2-4 shows..
Figure 2-2-4: Plug-in the SFP Transceiver
 Approved PLANET SFP Transceivers
PLANET Managed Switch supports both single mode and multi-mode SFP transceiver. The following list of approved PLANET
SFP transceivers is correct at the time of publication:
Fast Ethernet Transceiver (100Base-X SFP)
Model Speed (Mbps)
Connector
Interface
Fiber Mode Distance Wavelength (nm) Operating Temp.
MFB-FX 100 LC Multi Mode 2km 1310nm 0 ~ 60 ℃
MFB-F20 100 LC Single Mode 20km 1310nm 0 ~ 60 ℃
MFB-F40 100 LC Single Mode 40km 1310nm 0 ~ 60 ℃
MFB-F60 100 LC Single Mode 60km 1310nm 0 ~ 60 ℃
MFB-F120 100 LC Single Mode 120km 1550nm 0 ~ 60 ℃
MFB-TFX 100 LC Multi Mode 2km 1310nm -40 ~ 75 ℃
MFB-TF20 100 LC Single Mode 20km 1550nm -40 ~ 75 ℃
26