PLANET WGSW-48040HP - Manual (Page 18)

User’s Manual of WGSW-48040HP
1.5 Product Specifications
Product WGSW-48040HP
Hardware Specifications
Copper Ports 48 10/100/1000Base-T RJ-45 auto-MDI/MDI-X ports
SFP/mini-GBIC Slots
4 100/1000Base-X SFP interfaces, shared with Port-45 to Port-48
Compatible with 100Base-FX SFP transceiver
Console 1 x RJ-45 to RS-232 serial port (115200, 8, N, 1)
Switch Architecture Store-and-Forward
Switch Fabric 96Gbps / non-blocking
Throughput 71.4 Mpps@64Bytes
Address Table 16K entries, automatic source address learning and ageing
Share Data Buffer 16M bits
Flow Control
IEEE 802.3x pause frame for full-duplex
Back pressure for half-duplex
Jumbo Frame 10056bytes
Reset Button
< 5 sec: System reboot
> 5 sec: Factory default
Dimensions (W x D x H) 440 x 440 x 44.2 mm (W x D x H), 1U height
LED
System:
Power ( Green ), SYS (System, Green )
Alert:
Fan Alarm 1 ( Red ), Fan Alarm 2 ( Red )
PoE Ethernet Interfaces (Port 1 to Port 48):
LNK/ACT (10/100/1000Mbps, Green ), PoE in-Use ( Orange )
100/1000Mbps SFP Combo Interfaces (Port 45 to Port 48):
LNK/ACT (100/1000X, Green )
Power Requirements 100-240V AC, 50/60Hz, 1 0A
Power Consumption 722 watts / 2462 BTU
ESD Protection 2KV DC
Power over Ethernet
PoE Standard IEEE 802.3af / 802.3at PoE / PSE
PoE Power Supply Type End-Span
PoE Power Output
Per Port 52V DC, 590mA
Max. 30.8 watts
Power Pin Assignment 1/2(+), 3/6(-)
PoE Power Budget 6 00 watts (max.)
PD @ 11 watts 48 units
PD @ 15.4 watts 3 8 units PoE Ability
PD @ 30.8 watts 1 9 units
Layer 2 Functions
18