PLANET WGSW-48040HP - Manual (Page 120)

User’s Manual of WGSW-48040HP
Figure 4-6-9: Change Port VLAN of Port 1~3 to be VLAN2 and Port VLAN of Port 4~6 to be VLAN3
3. Checks VLAN Member at VLAN Membership Status:
Figure 4-6-10: Check VLAN 2 and 3 Members on VLAN Membership Page
4. Enable VLAN Tag for specific ports
Link Type: Port-3 (VLAN-2) and Port-6 (VLAN-3)
Change Port 3 Mode as Trunk, Selects Egress Tagging as Tag All and Types 2 in the Allowed VLANs column.
Change Port 6 Mode as Trunk and Selects Egress Tagging as Tag All and Types 3 in the Allowed VLANs column.
The Per Port VLAN configuration in Figure 4-6-11 appears.
120