PLANET WGSD-10020 - Manual (Page 63)

User’s Manual of WGSD / WGSW Layer 2+ Series
The page includes the following fields:
Object Description
 Mode Indicates the NTP mode operation. Possible modes are:

Enabled : Enable NTP mode operation. When enabling NTP mode
operation, the agent forward and to transfer NTP messages between the
clients and the server when they are not on the same subnet domain.

Disabled : Disable NTP mode operation.

Server # Provides the NTP IPv4 or IPv6 address of this switch. IPv6 address is in 128-bit
records represented as eight fields of up to four hexadecimal digits with a colon
separates each field (:).
For example, 'fe80::215:c5ff:fe03:4dc7'. The symbol '::' is a special syntax that
can be used as a shorthand way of representing multiple 16-bit groups of
contiguous zeros; but it can only appear once. It also uses the following legal
IPv4 address. For example, '::192.1.2.34'.
Buttons
: Click to apply changes.
: Click to undo any changes made locally and revert to previously saved values.
4.2.7 Time Configuration
Configure Time Zone on this page. A Time Zone is a region that has a uniform standard time for legal, commercial, and social
purposes. It is convenient for areas in close commercial or other communication to keep the same time, so time zones tend to
follow the boundaries of countries and their subdivisions. The Time Zone Configuration screen in Figure 4-2-9 appears
63