PLANET WGSD-10020 - Manual (Page 23)

User’s Manual of WGSD / WGSW Layer 2+ Series
PD @ 30.8 watts 7 units
Layer 2 functions
Port Configuration
Port disable / enable
Auto-negotiation 10/100/1000Mbps full and half duplex mode selection
Flow control disable / enable
Port Status
Display each port’s speed duplex mode, link status, flow control status,
auto-negotiation status, trunk status
Port Mirroring
TX / RX / both
Many-to-1 monitor
VLAN
 802.1Q tagged-based VLAN
 Q-in-Q tunneling
 Private VLAN Edge (PVE)
 MAC-based VLAN
 Protocol-based VLAN
 Voice VLAN
 IP Subnet-based VLAN
 MVR (Multicast VLAN Registration)
Up to 255 VLAN groups, out of 4094 VLAN IDs
Link Aggregation
IEEE 802.3ad LACP / Static Trunk
12 groups of 8-port trunk supported
Spanning Tree Protocol
 STP, IEEE 802.1D Spanning Tree Protocol
 RSTP, IEEE 802.1w Rapid Spanning Tree Protocol
 MSTP, IEEE 802.1s Multiple Spanning Tree Protocol
Up to 32 MSTP instances
QoS
Traffic classification based, Strict priority and WRR
8-Level priority for switching
- Port Number
- 802.1p priority
- 802.1Q VLAN tag
- DSCP/TOS field in IP packet
IGMP Snooping
IGMP (v1/v2/v3) Snooping, up to 255 multicast groups
IGMP Querier mode support
MLD Snooping
MLD (v1/v2) Snooping, up to 255 multicast groups
MLD Querier mode support
Access Control List
IP-based ACL / MAC-based ACL
Up to 256 entries
Bandwidth Control
Per port bandwidth control
Ingress: 100Kbps~1000Mbps
Egress: 100Kbps~1000Mbps
Layer 3 Functions
IP Interfaces Max. 8 VLAN interfaces
Routing Table Max. 32 routing entries
Routing Protocols
IPv4 software static routing
IPv6 software static routing
Management Functions
Basic Management Interfaces Console / Telnet / Web browser / SNMP v1, v2c
23