PLANET WGSD-10020 - Manual (Page 321)

User’s Manual of WGSD / WGSW Layer 2+ Series
4.16.3 Power Over Ethernet Configuration
This section allows the user to inspect and configure the current PoE configuration settings as screen in Figure 4-16-2 appears.
Figure 4-16-2: PoE Configuration Screenshot
The page includes the following fields:
Object Description
 System PoE Admin
Mode
Allows user to enable or disable PoE function. It will cause all of PoE ports to
supply or not supply power.
 PoE Temperature
Protection
Allows user to enable or disable PoE Temperature Protection.
 PoE Management
Mode
There are Six modes for configuring how the ports/PDs may reserve power and
when to shut down ports.

Class-Consumption mode: System offers PoE power according to PD real
power consumption.

Class-Reserved-Power mode: System reserves PoE power to PD
according to PoE class level.

Allocation-Consumption mode: System offers PoE power according to PD
real power consumption.

Allocation-Reserved-Power mode: Users allow to assign how much PoE
power for per port and system will reserve PoE power to PD.

LLDP-Consumption mode: System offers PoE power according to PD real
power consumption.

LLDP-Reserved-Power mode: System reserves PoE power to PD
according to LLDP configuration.
 Power Supply Budget
[W]
Set limit value of the total PoE port provided power to the PDs.
Available maximum value, please refer Table 4-16-1
 Temperature
Threshold
Allows setting over temperature protection threshold value. It system
temperature was over it then system lower total PoE power budget automatically.
 PoE Usage Threshold Allows setting how much PoE power budget could be limited.
321